Your safety should always be the priority, no matter what it is you’re doing. If you’re using a tool while enjoying your hobby or doing home maintenance, you should always consider your safety and that of others. A combination plier may not be a power tool, but it’s also included. Surely it is less dangerous than saws or drills, but you still need to be safe. If you don’t pay attention and work carefully, pliers can harm you or another person.
Best Practices for Safe Handling of Combination Pliers
Here are some safety tips for using combination pliers.
- Always wear safety goggles, a face shield and gloves whenever there is a danger of flying particles, wire pieces, etc.
- Always cut at right angles. Never swing the tool from side to side or bend the wire back and forth against the cutting edges.
- Ensure the cutting edges are sharp—worn-down and dull cutting edges require much more force than required.
- Ensure the toothed jaws are sharp and clean. Worn-down or greasy jaws can result in accidents. Such tools also need extra force to hold the workpiece, which increases the risk of muscular fatigue and strain.
- Don’t push away when applying pressure, always pull on the pliers. If the tools slip abruptly, you might hit your hand or lose your balance.
Avoiding Damage and Injury with Proper Pliers Techniques
Here are some further points you should avoid when using combination pliers.
- Don’t cut hardened wire unless the pliers are specially designed for this purpose.
- Don’t expose the plier to excessive heat.
- Don’t use pliers as a hammer.
- Don’t hammer on pliers to cut bolts or wires.
- Don’t extend the handle’s length to gain greater leverage.
- Don’t use pliers on bolts and nuts because they can round the corners of the bolt or nut.
With these tips for preventing injury with combination pliers, you can work safely and efficiently. Make sure to never work with damaged tools. So, if your current combination plier is worn out or damaged beyond repair, replace it with the Tata Agrico Combination Plier!
